MartinGorrell763
Aus Salespoint
water fed pole - For the last few years window cleaning with a water fed pole has gained in popularity, and is also the preferred means of cleaning outside windows. Time saving over the traditional way of window cleaning with the squeegee can be as almost as much ast 50percent faster. So what is involved, and what equipment would one need??
Firstly we'll begin with the brush since it is fault the machine that is doing the cleaning. There are numerous forms of brush on the market, nevertheless the main part of the brush for cleaning windows are the jets that spray the water, and also the bristles which can be in touch with the glass. There are 2 kinds of jets, and therefore are usually known as fan jets, or pencil jets. Fan sprays will often have water coming out under pressure, in most cases cover the entire width from the brush. Pencil jets have water flowing from two places within the brush only, and also the water just isn't under any pressure. Rinsing with all the brush about the glass is generally liked by people using fan jets, and pencil jets usually liked by people who lift the brush off of the glass when rinsing. The following important area of the brush is the bristles, they come in all lenghts, shapes, and density, but usually you wouldn't want them flocked(bashed at the ends)while they trap dirt, you also do not want them too dense, since the dirty water won't flow down the glass, and you desire them crinkled, in order that more of the bristle is within connection with the glass which aids scrubbing.
The pole, the very first window cleaning water fed pole ahead in the marketplace were very heavy constructed mostly of fibre glass, and were quite conveniently produced by the maker never to be used apart, meaning various different sizes were needed, to achieve different heights of window. Now thankfully there are numerous forms of pole on the market, which were produced for window cleaning, by window cleaners. These poles are getting lighter stronger, and a lot less costly.
water fed poles - Water treatment, You have to take all the dissolved solids out your tap water, to be able when the water evaporates from the glass there's nothing left out. Should you used ordinary regular faucet water to clean the windows, once the water evaporated the dissolved solids would be left behind, turning up as dirty marks about the glass. There are 2 ways of purifying the regular faucet water Deionization, and Reverse Osmosis, as well as the one you'll need can be discovered by how hard your regular faucet water is, For hard water Reverse Osmosis, and for soft water Deionization.
Other equipment needed, a pump to transfer water from your holding vessel to the window. You also have to have a way of carrying water for the work place which is often a van or trailer having a tank fitted, or a trolley with water containers onto it. A hose reel is needed to transfer the water from the tank to the pole. Additionally you need a 12V power supply to use the pump.
There are numerous good window cleaning suppliers selling systems, and the three main questions i hear you ask before you buy is, what sizes watter treatment product is supplied (measured in GPD) How high does the pole reach, and is also the tank baffled and secured within the van.
water fed pole systems - Whenever a water fed pole window cleaning product is purchased, it should not just be down to cost alone. The environmentally friendliness with the system should also be considered? How efficient may be the system?
