What Are Corning (Siecor) Unicam Connectors? Fiber Optic Tutorial Series One particular

Aus Salespoint

For normal epoxy and polish fiber optic connectors, the termination procedure typically includes 7 actions (up to 30 minutes) which are:

1. Strip the optical fiber to expose the 125um (140um or other sizes based on your fiber) fiber cladding

2. Clean the exposed bare fiber with isopropyl alcohol and lint-free of charge wipes

three. Insert the bare fiber into the connector center hole till ...

The termination process for business standard epoxy and polish fiber optic connectors.

For regular epoxy and polish fiber optic connectors, the termination approach typically includes 7 actions (up to 30 minutes) which are:

1. Strip the optical fiber to expose the mcse course 125um (140um or other sizes depending on your fiber) fiber cladding

two. Clean the exposed bare fiber with isopropyl alcohol and lint-free wipes

three. Insert the bare fiber into the connector center hole till the fiber stops

4. Inject fiber optic epoxy with a syringe dispenser into the connector body

five. Remedy the fiber optic epoxy ccna certification classes with high temperature which could be 85C, 100C or even 120C based on the type of fiber optic epoxy(you want a unique connector epoxy curing oven for this purpose)

6. Scribe the fiber protruding from the tip of the fiber connector

7. Polish the connector tip with lapping films either by hand or specialized fiber optic connector polishing machine(especially for single mode fiber connectors)

So you see that the process for terminating microsoft certified optical fiber is a complex process. It takes time and practice and only extremely educated fiber optic technicians can do the perform effectively with high yield ratio.

But fiber optic contractor installers for premise networks typically do not have the luxury of time or the costly tools for this type of termination. And that is when speedy termination fiber optic connectors come into handy.

Speedy termination fiber optic connectors are specially created for quickly termination without lots of experience necessary. A fiber optic contractor installer can do a fast termination inside two~three minutes.

There are a lot of different designs but the typical 1 such as Corning Siecor Unicam connector is like this:

The Unicam connector is pre-polished in factory with a fiber stub hidden inside the body of the connector. The installer then only needs 5 steps to full a Unicam connector termination with industry standard top quality.

1. Strip the optical fiber to expose the 125um fiber cladding

2. Clean the exposed bare fiber with isopropyl alcohol and lint-free wipes

3. Cleave the fiber with a cleaver

4. Insert the fiber into the Unicam connector till it stops

five. Crimp the fiber onto the Unicam connector with a fiber connector crimper tool

A fiber optic contractor installer can make a Unicam connector termination within two minutes. Compared to the normal epoxy strategy (up to 30 minutes), that is 87% time saved.

Unicam connectors supply equivalent insertion loss overall performance as a normal epoxy and polish connector. Unicam connectors also meet or exceed the mechanical and optical performance specified by EIA/TIA 568.B.

Fiber Optic For Sale Co stocks all kinds of Corning Siecor Unicam connectors like Unicam ST, TKT Unicam CTS SF, Corning TKT Unicam, Unicam LC, Unicam SC, Unicam tool kit and TKT Unicam Elite.